DarkroomSCAD
Configure a negative carrier and download a print-ready STL.
Export
Carrier
Wider opening that enables enlarging the areas around a negative's frame
Consecutive frames the opening spans, printed side by side in one exposure. Check the preview for fit.
A full carrier needs both top and bottom printed.
Text
Options
On: fused into the carrier (needs heat-set pegs). Off: exported as a separate STL with pilot holes, and the carrier gets matching screw holes — both sized for the peg screws.
Used whether the board is fused or downloaded separately.
Printed pegs can't be combined with the alignment board.
Machine screws (e.g. M2×4) thread straight into the bottom carrier; the head is the peg. Sets the bottom thread hole and, with the head style, the top clearance. Fine-tune both under Advanced.
The top carrier's hole clears the head (standard max diameter: 3.8 mm), so pick the style of the screws you actually have. Use Custom for anything else.